B.S. Major in Engineering Technology: Manufacturing Engineering Technology Concentration
Additional information: Reference the Program Landing Page for additional information, such as cost, delivery format, contact information, or to schedule a visit.
| Code | Title | Hours |
|---|---|---|
| Bachelor of Science, Major in Engineering Technology: Manufacturing Engineering Technology Concentration | ||
| Core Curriculum | ||
| Component Area I (Communications) | 6 | |
| Component Area II (Mathematics) 1 | 3 | |
| Component Area III (Life and Physical Science) | 8 | |
| Component Area IV (Language, Philosophy, and Culture) | 3 | |
| Component Area V (Creative Arts) | 3 | |
| Component Area VI (U.S. History) | 6 | |
| Component Area VII (Political Science/Government) | 6 | |
| Component Area VIII (Social and Behavioral Sciences) | 3 | |
| Component Area IX (Component Area Option) | 4 | |
| Degree Specific Requirement | ||
| MATH 1314 | Pre Calculus Algebra 1 | 3 |
| MATH 1316 | Plane Trigonometry 1 | 3 |
| PHYS 1301 & PHYS 1101 | General Phy-Mechanics & Heat and General Physics Laboratory I | 4 |
| PHYS 1302 & PHYS 1102 | Gen Phy-Snd,Lght, Elec, & Mag and General Physics Laboratory II | 4 |
| Major Foundation | ||
| ETEC 1010 | Engineering Foundations | 1 |
| ETDD 1361 | Engineering Graphics | 3 |
| ETEE 1340 | Introduction to Circuits | 3 |
| Major | ||
| ETEC 2382 | Manufacturing Processes | 3 |
| ETEC 3367 | Engineering Materials Techn | 3 |
| ETEC 3374 | Time And Motion Study | 3 |
| or ETDD 3379 | Industrial Design & Drafting | |
| ETEC 3375 | Statics | 3 |
| ETEC 4099 | Engineering Innovation | 1 |
| ETEC 4340 | Alternative Energy Technology | 3 |
| or ETEC 3340 | Solar and Wind Energy Systems | |
| ETEC 4384 | Supervisory Personnel Practice | 3 |
| ETEC 4391 | Work Base Mentorship | 3 |
| ETDD 1366 | Machining Technology I | 3 |
| ETDD 2366 | Machining Technology II | 3 |
| ETDD 3310 | Product Design & Development | 3 |
| ETDD 4380 | Material Hand & Plant Layout | 3 |
| ETDD 4388 | 3D Parametric Design | 3 |
| or ETDD 4339 | Advanced Computer-Aided Drafting and Modeling | |
| Concentration: Manufacturing Engineering Technology | ||
| ETEC 4369 | Spec Topics in Industrial Tech | 3 |
| or ETEC 4315 | Quality Assurance and Control | |
| ETEC 4376 | Strength of Materials | 3 |
| ETEC 4399 | Senior Design | 3 |
| ETEE 2320 | Circuits and Systems | 3 |
| ETEE 3313 | Industrial Robotics | 3 |
| ETEE 4351 | Automation & PLCs | 3 |
| ETSM 3386 | Industrial Safety | 3 |
| Total Hours | 121 | |
- 1
If MATH 1316 or MATH 1314 are used to satisfy the Core Curriculum requirement for Component Area II (Mathematics) then an additional 3 hours in Math will be needed to meet the 120 total semester credit hour requirement.
Notes
Students must earn a 2.0 minimum overall GPA in all coursework.
Students must meet a 2.0 minimum overall major GPA in all major coursework.
Students must earn a 2.0 minimum SHSU GPA in all coursework.
Students must meet a 2.0 minimum SHSU major GPA in all major coursework.
Additional information: Reference the Program Landing Page for additional information, such as cost, delivery format, contact information, or to schedule a visit.
| First Year | |||
|---|---|---|---|
| Fall | Hours | Spring | Hours |
| Component Area I | 3 | Component Area I | 3 |
| Component Area IX | 4 | Component Area IV | 3 |
| ETEC 1010 | 1 | ETDD 1366 | 3 |
| ETDD 1361 | 3 | ETEE 1340 | 3 |
| MATH 13141 | 3 | MATH 13161 | 3 |
| 14 | 15 | ||
| Second Year | |||
| Fall | Hours | Spring | Hours |
| Component Area III | 4 | Component Area II1 | 3 |
| Component Area V | 3 | Component Area III | 4 |
| ETDD 2366 | 3 | Component Area VI | 3 |
| ETDD 3310 | 3 | ETEC 2382 | 3 |
| PHYS 1301 & PHYS 1101 | 4 | PHYS 1302 & PHYS 1102 | 4 |
| 17 | 17 | ||
| Third Year | |||
| Fall | Hours | Spring | Hours |
| Component Area VI | 3 | Component Area VII | 3 |
| Component Area VII | 3 | ETEC 4340 or 3340 | 3 |
| ETEC 3367 | 3 | ETDD 4380 | 3 |
| ETEC 3374 or ETDD 3379 | 3 | ETDD 4388 or 4339 | 3 |
| ETEC 3375 | 3 | ||
| 15 | 12 | ||
| Fourth Year | |||
| Fall | Hours | Spring | Hours |
| Component Area VIII | 3 | ETEC 4369 or 4315 | 3 |
| ETEC 4099 | 1 | ETEC 4376 | 3 |
| ETEC 4384 | 3 | ETEC 4391 | 3 |
| ETEE 2320 | 3 | ETEC 4399 | 3 |
| ETEE 3313 | 3 | ETEE 4351 | 3 |
| ETSM 3386 | 3 | ||
| 16 | 15 | ||
| Total Hours: 121 | |||
- 1
If MATH 1316 or MATH 1314 are used to satisfy the Core Curriculum requirement for Component Area II (Mathematics) then an additional 3 hours in Math will be needed to meet the 120 total semester credit hour requirement.
Notes
Students must earn a 2.0 minimum overall GPA in all coursework.
Students must meet a 2.0 minimum overall major GPA in all major coursework.
Students must earn a 2.0 minimum SHSU GPA in all coursework.
Students must meet a 2.0 minimum SHSU major GPA in all major coursework.
The BS in Engineering Technology: Manufacturing Engineering Technology Concentration is designed to provide graduates with the following marketable skills:
- Knowledge and hands-on experience in various manufacturing processes such as machining, plastic processing, and 3D printing.
- Skills in product design and development and the product life cycle.
- Skills in the plant layout for high efficiency production.
- Skills in material testing and properties measurement following industrial standards.
- Automation and control of manufacturing equipment.
- Demonstrate leadership, teamwork, and effective communication skills.
