Bachelor of Science, Major in Engineering Design Technology
Additional information: Reference the Program Landing Page for additional information, such as cost, delivery format, contact information, or to schedule a visit.
| Code | Title | Hours |
|---|---|---|
| Bachelor of Science, Major in Engineering Design and Technology | ||
| Core Curriculum | ||
| Component Area I (Communication) | 6 | |
| Component Area II (Mathematics) 1 | 3 | |
| Component Area III (Life and Physical Science) 2 | 8 | |
| Component Area IV (Language, Philosophy, and Culture) | 3 | |
| Component Area V (Creative Arts) | 3 | |
| Component Area VI (U.S. History) | 6 | |
| Component Area VII (Political Science/Government) | 6 | |
| Component Area VIII (Social and Behavioral Sciences) | 3 | |
| Component Area IX (Component Area Option) 1 | 4 | |
| Degree Specific Requirements | ||
| MATH 1314 | Pre Calculus Algebra 1 | 3 |
| MATH 1316 | Plane Trigonometry 1 | 3 |
| MATH 3379 | Statistical Mthods in Practice | 3 |
| or ENGL 3330 | Intro to Technical Writing | |
| PHYS 1301 & PHYS 1101 | General Phy-Mechanics & Heat and General Physics Laboratory I | 4 |
| PHYS 1302 & PHYS 1102 | Gen Phy-Snd,Lght, Elec, & Mag and General Physics Laboratory II | 4 |
| Major: Foundation | ||
| ETCM 2363 | Architectural Design | 3 |
| ETDD 1361 | Engineering Graphics | 3 |
| ETDD 3310 | Product Design & Development | 3 |
| ETDD 3366 | Intro to Virtual and Augmented Reality | 3 |
| ETDD 3379 | Industrial Design & Drafting | 3 |
| ETDD 4339 | Advanced Computer-Aided Drafting and Modeling | 3 |
| ETDD 4380 | Material Hand & Plant Layout | 3 |
| ETDD 4388 | 3D Parametric Design | 3 |
| ETEC 1010 | Engineering Foundations | 1 |
| ETEC 1371 | Descriptive Geometry | 3 |
| or ETDD 1366 | Machining Technology I | |
| ETEC 3367 | Engineering Materials Techn | 3 |
| ETEC 3374 | Time And Motion Study | 3 |
| or ETEC 3300 | Technology Innovations | |
| ETEC 3375 | Statics | 3 |
| ETEC 4099 | Engineering Innovation | 1 |
| ETEC 4384 | Supervisory Personnel Practice | 3 |
| or ETEC 4376 | Strength of Materials | |
| ETEC 4391 | Work Base Mentorship | 3 |
| ETEC 4399 | Senior Design | 3 |
| ETEE 1340 | Introduction to Circuits | 3 |
| ETSM 3386 | Industrial Safety | 3 |
| Minor: Required 3 | ||
| Minor | 6 | |
| Minor (9 hours advanced) | 9 | |
| Total Hours | 124 | |
- 1
MATH 1316 or MATH 1314 or MATH 1420 or MATH 1324 satisfies the Core Curriculum requirement for Component Area II (Mathematics) and the Degree Specific requirement. In addition, MATH 1420 satisfies one semester credit hour of the Core Curriculum requirement for Component Area IX (Component Area Option).
- 2
Must be taken from BIOL, CHEM, GEOL, or GEOG 1401 only.
- 3
All minors can be paired with this degree program.
Notes
Students must earn a 2.0 minimum overall GPA in all coursework.
Students must meet a 2.0 minimum overall major GPA in all major coursework.
Students must earn a 2.0 minimum SHSU GPA in all coursework.
Students must meet a 2.0 minimum SHSU major GPA in all major coursework.
Additional information: Reference the Program Landing Page for additional information, such as cost, delivery format, contact information, or to schedule a visit.
| First Year | |||
|---|---|---|---|
| Fall | Hours | Spring | Hours |
| Component Area I | 3 | Component Area I | 3 |
| Component Area IX | 4 | Component Area IV | 3 |
| ETDD 1361 | 3 | ETEC 1371 or ETDD 1366 | 3 |
| ETEC 1010 | 1 | ETEE 1340 | 3 |
| MATH 13141 | 3 | MATH 13161 | 3 |
| 14 | 15 | ||
| Second Year | |||
| Fall | Hours | Spring | Hours |
| Component Area VI | 3 | Component Area VI | 3 |
| ETCM 2363 | 3 | Component Area VII | 3 |
| ETDD 3310 | 3 | Component Area VIII | 3 |
| PHYS 1301 & PHYS 1101 | 4 | MATH 3379 or ENGL 3330 | 3 |
| Minor2 | 3 | PHYS 1302 & PHYS 1102 | 4 |
| 16 | 16 | ||
| Third Year | |||
| Fall | Hours | Spring | Hours |
| Component Area III3 | 4 | Component Area III3 | 4 |
| ETDD 3366 | 3 | Component Area V | 3 |
| ETEC 3375 | 3 | ETEC 3367 | 3 |
| ETDD 3379 | 3 | ETEC 3374 or 3300 | 3 |
| Minor2 | 3 | ETSM 3386 | 3 |
| 16 | 16 | ||
| Fourth Year | |||
| Fall | Hours | Spring | Hours |
| Component Area VII | 3 | ETDD 4388 | 3 |
| ETDD 4339 | 3 | ETEC 4391 | 3 |
| ETDD 4380 | 3 | ETEC 4399 | 3 |
| ETEC 4099 | 1 | Minor Advanced2 | 6 |
| ETEC 4384 or 4376 | 3 | ||
| Minor Advanced2 | 3 | ||
| 16 | 15 | ||
| Total Hours: 124 | |||
- 1
MATH 1316 or MATH 1314 or MATH 1420 or MATH 1324 satisfies the Core Curriculum requirement for Component Area II (Mathematics) and the Degree Specific requirement. In addition, MATH 1420 satisfies one semester credit hour of the Core Curriculum requirement for Component Area IX (Component Area Option).
- 2
All minors can be paired with this degree program.
- 3
Must be taken from BIOL, CHEM, GEOL, or GEOG 1401 only.
Notes
Students must earn a 2.0 minimum overall GPA in all coursework.
Students must meet a 2.0 minimum overall major GPA in all major coursework.
Students must earn a 2.0 minimum SHSU GPA in all coursework.
Students must meet a 2.0 minimum SHSU major GPA in all major coursework.
The Texas Higher Education Coordinating Board (THECB) marketable skills initiative is part of the state’s 60x30TX plan and was designed to help students articulate their skills to employers. Marketable skills are those skills valued by employers and/or graduate programs that can be applied in a variety of work or education settings and may include interpersonal, cognitive, and applied skill areas.
The BS in Engineering Design Technology is designed to provide graduates with the following marketable skills:
-
Conduct engineering design using Computer Aided Design (CAD) tools.
-
Fabricate prototypes via various manufacturing processes and equipment.
-
Communicate effectively in both written and verbal forms.
-
Work collaboratively in a team environment.
